Stamp Making Co2 Laser Engraver
This machine is our mini co2 laser engraving machine, it is specially design for all kinds of stamps making engraving, these designs include special working table, small working size, small laser power, etc.
This mini laser machine belongs to the desktop size, it is quite powerful with 40w water cooling tube , it is designed for engraving and making all kinds of the stamps, Besides, this machine can engrave all kinds of nonmetal materials, and do cutting jobs for the thin materials.
1. For stamp: Ox horn, wood, rubber, organic glass, atom, crystal, soft jade.
2. For crafts: two-tone board, wood, bamboo, glass, fabrics.
3. Can engrave logo, picture, name, style no. on electron component.
|Machine Type||Stamp Making Co2 Laser Engraver|
40w water cooling
Minimum shaping character
letter 1 mm, Chinese 2mm
Support graphic format
BMP, PLT etc
With the USB interface
AC220V 50HZ 3A / AC110V 60HZ 3A
Advantages of Stamp Making Co2 Laser Engraver
1) Compact and professional design, high practicability.
2) Adopting stepper motor and high quality drive, ensures high speed and wonderful accuracy.
3) USB interface can support data transmitting to be quickly finished.
4) Liquid crystal display panel.
5)Transmit files directly from CorelDraw, AutoCAD, high-speed USB2.0interace output can support off-line working.
6) Working resume from power break point when power on.
7) Electrical drive up-down table, rotary device, red dot, vacuum, etc are to option.
Laser stamp engraving machine operation method:
1 ) With a laser printer will produce a good proofs printed on acid paper.
2 ) Specifications covered by a transparent comp exposure film , its size to completely cover the comp prevail.
3 ) Printing proofs,exposure film , photosensitive seal between the three pads and headed for the order : print proofs at the bottom , close to the photosensitive machine glass , print side up , the middle layer is exposed film , the third layer is Seal mat. Three were stable and close contact,in the middle there is no gap folds.The photosensitive machine light board cover , and pull the handle to tighten it.
4 ) Apply power and turn on the power switch, a photosensitive unit starts charging.
5 ) A wide variety of photosensitive seal pad , stamp pad the different needs of different exposure energy.
6 ) Loosen the clamping lever , opened light board, the exposure of the photosensitive mat finish removed,torn film.
7 ) the exposure good print pad into the appropriate chapters shell, press seal specifications injected scalar ink, ink is distributed evenly even.