Hot Products


Cutting Technology Of Laser Engraving Machine
Sep 12, 2017

     Using laser engraving machine cutting, the process is very simple, as the use of computers and printers on paper printing. You can use a variety of graphics processing software in the WIN98/WIN2000/WINXP environment, such as CorelDRAW design, scanned graphics, vectorization of the text and a variety of CAD files can easily "print" to the engraving machine. The only difference is that the printing of toner on paper, and laser engraving is the laser beam to wood products, grams, plastic plates, metal plates, stone and other almost all of the material.Laser Engraving Machine

     Laser engraving by carving different types can be divided into dot-matrix carving and vector cutting: dot-matrix carving dot-matrix engraving is similar to high-resolution dot-matrix printing. The laser head swings around each time, carving out a line composed of a series of points, and then the laser head moving up and down to carve out many lines, and finally constitute the entire version of the image or text.Laser Engraving Machine

     Scanned graphics, text and vectorization can be carved using dot matrix. Vector cutting is different from dot-matrix engraving, and vector cutting is done on the contour line of the text. We usually use this mode to cut through the wood, the gram grain, the paper and so on material, also may carry on the marking operation on many kinds of material surface.

     The performance of a carving machine, mainly by carving speed, engraving strength and the size of the spot decided. Engraving speed engraving speed refers to the speed of the laser head moving, usually with IPs (in inches/sec), high speed brings high productivity. Speed is also used to control the depth of the cutting, and for a particular laser intensity, the slower the speed, the greater the depth of cutting or engraving.Laser Engraving Machine

  • facebook