Categories

Hot Products

News

Operating Procedures For CNC Router
Sep 12, 2017

     Milling Machine processing technology safety operation procedures are as follows: When Milling machine operation, prohibit freehand or with cotton yarn sweeping machine tool, people can not stand in the tangential direction of milling cutter, not to use the mouth blowing chips. Before moving the worktable and the lifting table, the fixing screws must be loosened and the nut tightened when not moved. CNC Router

     The tool lever, the lever, the chuck and the tool should be installed and tightened before the boot, and the spindle should not be used to help the loading and unloading. The training should be closed to the power supply, cleaning machine tools, and the handle placed in empty space, the worktable moved to the center.CNC Router

    Before the operation to check the milling machine parts of the handle is normal, according to the provisions of the lubricating oil, and low-speed commissioning 1-2 minutes, the square can be manipulated. Should wear overalls before work, the female worker wears the work cap, controls strictly forbids wearing the glove. The clamping workpiece should be solid.     Loading and unloading, knife, measuring, speed, fastening mandrel and cleaning machine tools must be done after the machine is stopped. Work gauges, workpieces and other sundries are prohibited on the workbench. When driving, check whether the workpiece and cutter are positioned properly.CNC Router

     When the milling machine automatically passes the knife, the hand and the silk clasp should be taken off, the worktable cannot walk to two limit position, the limit block should be placed firmly. Before the operation to check the milling machine parts of the handle is normal, according to the provisions of the lubricating oil, and low-speed commissioning 1-2 minutes, the square can be manipulated.CNC Router

    The tool is the most important operation content in NC machining, and its accuracy will directly affect the machining precision of the parts. The tool method must be adapted to the machining precision of the parts. In this paper, the use and advantages and disadvantages of the common tool method of NC Milling Machine (machining center) are systematically described.     The purpose of the tool is to determine the position of the origin of the workpiece coordinate system (the origin of the program) in the machine coordinate system by means of the tool or tool, and to enter the tool data into the corresponding storage location or through the G92 instruction set. It is the most important operation content in NC machining, and its accuracy will directly affect the machining precision of the parts.CNC Router


  • QR CODE
  • facebook